Type SHD-GC Three-Conductor Portable Power Cable, CPE Sheath 8kV Cable

Type SHD-GC Three-Conductor Portable Power Cable, CPE Sheath 8kV Cable

1.Application:

These cables are designed for connections between units of mine distribution systems, suitable forinstalled in duct, conduit or open air and for direct burial in wet and dry locations.

2.Conductor

4/0 AWG Coated annealed copper brunched wires, rope lay stranded per ASTM B172

Extruded Strand Shield (ESS)

Extruded thermosetting semi conducting stress control layer over conductor

3.Insulation

Ethylene Propylene Rubber (EPR) insulation

4.Insulation Shield

Extruded conducting layer covered by a conducting tape and a flexible coated copper textile braid shield overall

5.Ground Check Conductor

One annealed copper rope lay stranded per ASTM B172, insulated with high strength polypropylene.

6.Grounding Conductors

Two coated copper rope lay stranded per ASTM B172, in contact with the flexible copper braid shield

7.Jacket

Reinforced, two layers, extra heavy duty, lead cured Chlorinated Polyethylene (CPE)

8. Detailed Standard

ICEA S-75-381/NEMA WC 58

ASTM B-8

CAN/CSA-C22.2 No.96

Conductors: Stranded annealed bare copper conductor.

Conductor Shield:Conducting layer.

Insulation:Ethylene Propylene Rubber (EPR).

Insulation Shield:Conducting layer + copper tape.

Ground Check Conductor:Copper conductor with a yellow polypropylene insulation.

Grounding Conductor:Tinned copper conductor.

Jacket: Chlorinated Polyethylene(CPE), black.